Saving Frequently Used Settings - Ricoh pentax KP Operating Manual

Adjusting the Brightness of the Monitor for
Outdoor Shooting
If the monitor display is difficult to see
when you take pictures outdoors or in
other situations, adjust the brightness
of the monitor in [Outdoor View
Setting] of the D2 menu.
t Memo
• When [Outdoor View Setting] is assigned to the function dial,
you can change the setting using the Smart Function. (p.21,
p.105) By default, [Outdoor View Setting] is assigned to C3.
Setting the Lighting-up of the Indicator Lamps
6
You can set whether to light up each
indicator lamp in [Indicator Lamps] of
the D2 menu.
108
Four factory preset settings—HDR LANDSCAPE, MACRO,
ASTROPHOTO, and MANUAL LENS—are assigned to O to
2
4 of the mode dial.
LCD Display Settings LCD Display Settings
Outdoor View Setting Outdoor View Setting
You can save frequently used camera settings to O to 5 by
Night Vision LCD Display Night Vision LCD Display
Indicator Lamps Indicator Lamps
replacing the preset settings with them.
The following settings can be saved.
Exit Exit
1
Indicator Lamps Indicator Lamps
Self-timer Self-timer
GPS LED Indicators GPS LED Indicators
2
3
4
5
6
u Caution
• [Save USER Mode] cannot be selected when the mode dial

Saving Frequently Used Settings

Exposure Mode
Sensitivity
EV Compensation
Flash Mode
Saving the Settings
Set the exposure mode and all the necessary
settings to save.
Select [Save USER Mode] in the A5 menu and
press D.
The [Save USER Mode] screen appears.
Select [Save Settings] and
press D.
The [Save Settings] screen
appears.
Select a USER mode from [USER1] to [USER5],
and press D.
Select [Save] and press E.
Press F.
The screen of Step 3 reappears.
is set to R or in C mode.
A5
Drive Mode
White Balance
A menu and E menu
settings (with exceptions)
Save USER Mode Save USER Mode
Save Settings Save Settings
Rename USER Mode Rename USER Mode
Check Saved Settings Check Saved Settings
Reset USER Mode Reset USER Mode