Attaching The Strap; Getting Started - Ricoh pentax KP Operating Manual

Attaching the Strap

1
Pass the end of the strap
through the triangular ring.
2
2
Secure the end of the strap
on the inside of the clasp.
36
Using the Optional Grip
The Grip S O-GP167 is installed
on the camera. To replace it with
the optional Grip M O-GP1671 or
Grip L O-GP1672, fully loosen the
grip mounting screw using the hex
wrench supplied with the optional
grip, and remove the grip. (The
screw cannot be removed from the grip.)
Attach the grip to the camera so
that the tabs of the grip are
engaged in the slots on the
camera, and securely tighten the
grip mounting screw.
The optional Battery Grip D-BG7
is supplied with the Grip L
O-GP1672.