Af Fine Adjustment - Ricoh pentax KP Operating Manual

3
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
Changes the position of the AF area.
ABCD
Increases/reduces the size of the AF
R
area (when [Multiple AF Points] is
selected).
Returns the AF area to the center.
M
4
Press E.
The AF area is set.
t Memo
• In R mode, [AF Active Area] is fixed to [Face Detection].
• You can switch the function of the arrow keys to AF area
change mode with X, Y, or Z, instead of pressing and
holding E. (p.102) When [Change AF Area] is assigned to
X, Y, or Z, the operation by pressing and holding E is
disabled.

AF Fine Adjustment

You can precisely fine-tune your lenses with the camera's
autofocus system.
1
Select [23 AF Fine Adjustment] in the E4 menu
OK OK
and press D.
The [23 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
Applies the same adjustment value to all
Apply All
lenses.
Saves an adjustment value for the lens
Apply One
being used. (Up to 20 values)
3
Select [Setting] and adjust
the value.
Available operations
D/R to the right
C/R to the left
M
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
E4
23 23 AF Fine Adjustment AF Fine Adjustment
3 3 Apply One Apply One
±0 ±0
Setting Setting
Reset Individual Settings Reset Individual Settings
±0 ±0
Cancel Cancel
Adjusts the focus to a closer
position.
Adjusts the focus to a farther
position.
Resets the adjustment value to
the default setting.
3
Save Save
63