Using The Smart Function; Using The Control Panel - Ricoh pentax KP Operating Manual

Using the Smart Function

You can easily change settings with
two dials: the function dial and the
setting dial. Use the function dial (1)
to select the desired function, and
use the setting dial (2) to change its
setting value.
The following functions can be selected.
Function
Dial
Disables the setting dial operation.
R
AE Changes the AE Metering method.
HDR Changes the capture type of HDR Capture. p.77
Changes the shooting speed for
CH/CL
Continuous Shooting.
Changes the image finishing tone for
C1
Custom Image (default setting).
Changes the capture type of AA Filter
C2
Simulator (default setting).
Changes the brightness of the monitor
C3
(default setting).
You can assign functions to C1, C2, and C3 in [Button
Customization] of the A5 menu. (p.105)
The assigned functions can be
checked on the status screen or Live
View screen when the function dial or
setting dial is turned.
1
2
Function Page
p.57
p.65
p.74
p.79
p.108
Custom Image Custom Image
99999 99999

Using the Control Panel

Press G in standby mode.
Use ABCD to select an item.
HDR Capture HDR Capture HDR Capture
Off Off Off
02/02/2017 02/02/2017 10:23 10:23
–
Use R to change settings.
HDR Capture HDR Capture HDR Capture
Off Off Off
Cancel Cancel
Press F to
cancel the setting
operation.
t Memo
• The functions that can be selected vary depending on the
current camera settings.
• If no operations are made within approximately 1 minute
while the control panel is displayed, the camera returns to
standby mode.
99999 99999
Use R to change settings.
Press E to make detailed
settings.
99999 99999
Use AB to switch between
items.
OK OK
Press E to confirm the selected item
and return to the control panel.
1
21