Custom Setting Menus - Ricoh pentax KP Operating Manual

Custom Setting Menus

1
1 EV Steps
2 Sensitivity Steps
3 Meter Operating Time
4 Auto EV Compensation
E1
5 Link AE and AF Point
6 AE-L with AF Locked
7 Bulb (B) Mode Options
8 Release While Charging
9 Bracketing Order
10 One-Push Bracketing
11 Interval Shooting Options
E2
12 AF in Interval Shooting
13 WB Adjustable Range
14 AWB in Tungsten Light
34
Item
Sets the adjustment steps for the exposure.
Sets the adjustment steps for the ISO sensitivity.
Sets the meter operating time.
Automatically compensates the exposure when the correct
exposure cannot be achieved with the current settings.
Sets whether to link the exposure value and the AF point in
the focusing area.
Sets whether to lock the exposure value when the focus is
locked.
Sets the camera operation when 0 is pressed in M
mode.
Sets whether to release the shutter while the built-in flash is
being charged.
Sets the order for Bracketing shooting.
Shoots all frames with one press of the release in Bracketing.
Sets whether to start counting the time of interval from when
exposure starts or when exposure ends for Interval Shooting,
Interval Composite, and Interval Movie Record.
Sets whether to lock the focus position used when the first
picture is taken or perform autofocus for each exposure for
Interval Shooting, Interval Composite, Interval Movie Record,
and Star Stream.
Sets whether to automatically fine-tune the white balance
when the light source is specified for the white balance
setting.
Sets the tungsten light color tone when the white balance is
set to [Auto White Balance].
Function Default Setting Page
1/3 EV Steps p.50
1 EV Step p.54
10sec. p.19
Off –
Off p.57
Off –
p.51
Type1
Off p.58
p.66
0 - +
Off p.66
Interval p.71
Locks focus at
p.71
1st exposure
Fixed p.72
Strong
p.72
Correction