Ricoh pentax KP Operating Manual page 18

Shooting Info Display
You can change the type of
1
information displayed in standby
mode by pressing G while the
control panel is displayed. Use CD
to select the type and press E.
When shooting with the viewfinder
Status Displays the settings for shooting with the
Screen viewfinder. (p.14)
Displays the camera
angle.
A bar scale indicating
the horizontal camera
angle appears at the
center of the screen,
Electronic
and a bar scale
Level
indicating the vertical
camera angle
appears on the right side. When the angle
exceeds the range that can be displayed in each
scale, the indicator segments of the scale are
displayed in red.
Display Off Nothing is displayed on the monitor.
Displays the current
latitude, longitude,
altitude, direction,
Coordinated Universal
Time (UTC), capture
Electronic
mode, and exposure
Compass
value. Turn the
camera off and on again to return to the status
screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.121)
16
102400 102400
Status Screen Status Screen
99999 99999
1/ 1/ 250 250 F5.6 F5.6 1600 1600 0.0 0.0
Example:
Tilted 1.5° to the left (yellow)
Vertically level (green)
N 36°45.410' N 36°45.410'
W140°02.000' W140°02.000'
0°
89m 89m
02/02/2017 02/02/2017
10:00:00 10:00:00
1/ 1/ 250 250 F5.6 F5.6 1600 1600 0.0 0.0
When shooting with Live View
Standard The Live View image and the settings for
Information shooting with Live View are displayed.
Display (p.14)
Electronic The same electronic level as when shooting with
Level the viewfinder is displayed.
No
Certain icons, such as those for the capture
Information
mode and drive mode, are not displayed.
Display
t Memo
• The status screen is displayed when the camera is turned off
and on again. If [Shooting Info Display] is set to Z (On) in
[Memory] of the A5 menu, the screen selected on the
Shooting Info Display selection screen appears when the
camera is turned off and on again. (p.110)
• When [LCD Display Options] is assigned to the function dial,
you can switch the display using the Smart Function. (p.21,
p.105)