Moving The Printer - Xerox VersaLink B400 User Manual

Moving the Printer

WARNINGS:
• To prevent you from dropping the printer or injury, lift the printer firmly by gripping
the recessed areas on both sides of the printer. Never lift the printer by gripping any
other areas.
• If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer.
If the optional 550-Sheet Feeder is not fixed to the printer securely, it can fall to the
ground and cause injury.
Follow these instructions when moving the printer:
1. Power off the printer, then disconnect the power cord and other cables from the back of the printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can
damage it, which can lead to fire or electric shock.
2. Remove any paper or other media from the output tray. If the output tray extension is open,
close it.
3. Remove the paper from the paper tray.
Xerox VersaLink B400 Printer
® ®
User Guide
Maintenance
135