Paper and Media
Loading Paper in the Bypass Tray
The Bypass Tray supports the widest variety of media types. It is intended primarily for small-quantity
jobs that use special media.
To load paper in the bypass tray:
1.
Open the bypass tray. If the bypass tray is loaded with paper already, remove any paper that is a
different size or type.
2.
Pull out the extension tray for larger sizes.
3.
Move the width guides to the edges of the tray.
4.
Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note:
To avoid jams and misfeeds, do not remove paper from its packaging until you are ready
to use it.
104
Xerox
VersaLink
®
User Guide
B400 Printer
®