Moving The Printer - Xerox VersaLink B600 User Manual

Maintenance

Moving the Printer

W W a a r r n n i i n n g g : :
• To lift the printer, always use at least two people to grasp the hand holds on each side of the printer.
• To prevent you from dropping the printer or injury, lift the printer firmly by gripping the recessed areas
on both sides of the printer. Never lift the printer by gripping any other areas.
• If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer. If the optional
550-Sheet Feeder is not fixed to the printer securely, it could fall to the ground and cause injury.
Follow these instructions when moving the printer:
1. Power off the printer, then disconnect the power cord and other cables from the back of the printer.
Note: To prevent electric shock, never touch the power plug with wet hands. When removing the power cord,
ensure that you pull the plug and not the cord. Pulling the cord can damage it, which can lead to fire or
electric shock.
2. Remove any paper from the Bypass Tray.
146
Xerox ® VersaLink ® B600/B610 Printer User Guide