Specifications, Requirements, and Precautions
1.7
Mounting Instructions
To ensure optimum alignment of the camera when mounting the camera in your system, you must
follow a certain tightening sequence when tightening screws.
Depending on whether you use M2 or M3 screws, a different tightening sequence applies.
The tightening sequences are illustrated in
with C-mounts. However, the tightening sequences apply equally to cameras with
CS-mounts.
1.7.1
Tightening Sequence When Using the M2 Screws
To tighten the M2 screws:
1. Tighten the screws for the mounting screw holes (a) in
2. Tighten the screws for the mounting screw holes (b) in
(a)
(a)
Fig. 30: Designations of the Mounting Screw Holes for the M2 Screws.
44
Bottom
Figure 30
and
Figure 31
Figure
30.
Figure
30.
(b)
(b)
AW00123409000
for cameras
Basler ace USB 3.0