Installation - Basler acA2040-55 User Manual

AW00123409000

2 Installation

The information needed for installing the camera and related software is included in the Installation
and Setup Guide for Cameras Used With pylon for Windows (AW000611).
You can download the document from the Basler website:
Drivers and Tools for changing camera parameters are indicated in the next chapter.
Electric Shock Hazard
Risk of Burn or Death.
The power supplies used for supplying
power to the I/O lines and

camera power

must meet the Safety Extra Low Voltage (SELV) and Limited Power Source (LPS)
requirements.
If you use a powered hub as part of the USB 3.0 connection, the powered hub
must meet the SELV and LPS requirements.
Fire Hazard
Risk of Burn
The power supplies used for supplying
power to the I/O lines and

camera power

must meet the Limited Power Source (LPS) requirements.
If you use a powered hub as part of the USB 3.0 connection, the powered hub
must meet the LPS requirements.
The camera is designed to be connected to a USB 3.0 port installed in your
computer. When connected to a USB 2.0 port, the Basler ace USB 3.0 camera will
be detected but will not operate.
Basler ace USB 3.0
www.baslerweb.com
DANGER
WARNING
Installation
59