1.1.3
How to attach the hood (Optional)
To install the optional hood (OP24-40), do the following:
1. Referring to the figure below, fit the hood reinforcement fixture to the back of the
PCU-3000.
For flush-mounting: Install the hood fixing fixture with the flush mount brackets.
For desktop mounting: Install the hood fixing fixture with the desktop mount
brackets.
Note: The screws and washers to fix the hood fixing fixture are supplied with the
PC-3000.
Flush mount
2. Loosen the four knobs on the hood fixing fixture, referring to the figure below.
Flush mount bracket
Hood fixing fixture
Knobs
Desktop
1. MOUNTING
Desktop
mount bracket
Hood fixing fixture
1-5