Hitachi WJ200 Series Quick Reference Manual page 49

(*) V2 is boolean variables are combined in two octets. Refer to the specification of PROFIdrive f or
detail.
The error codes are the following.
Error No.
= Error
value1
0x00 Impermissible
parameter number
0x01 Parameter value cannot
be changed
0x02 Low
exceeded
0x03 Faulty subindex
0x04 No array
0x05 Incorrect data type
0x06 Setting
(may only be reset)
0x07 Description
cannot be Changed
0x09 No description
available
0x0B No operation priority
0x0F No text array available
0x11 Request
executed
operating state
0x14 Value impermissible
0x15 Response too long
Meaning
Access to unavailable parameter
Change access to a parameter value
that cannot be changed
or high limit Change access with value outside the
value limits
Access to unavailable subindex of array
or string parameter. Shall not be used
for single parameters
Access with subindex to non-indexed
Parameter
Change access with value that does not
match the data type of the parameter
not permitted Change access with value unequal to 0
where this is not permitted
element Change access to a description element
that cannot be changed
data Access to unavailable description
(parameter value is available)
Change access without rights to change
Parameters
Access to text array that is not available
(parameter value is available)
cannot be Access is temporarily not possible for
because of reasons that are not specified in detail.
When the parameter of WJ200 / WL200
is accessed, please check whether the
inverter can accept change access.
Change access with a value that is
within the value limits, but is not
permissible for other long-term reasons
(parameter with defined single values)
The length of the current response
exceeds the maximum transmittable
length of the response transport block.
In case of a multi parameter request,
the response block was shortened by
omitting of parameter requests.
Chapter 8 PROFINET Specification
Used at
43
Additional info
= Error value 2
0
Subindex
Subindex
Subindex
0
0
Subindex
Subindex
0
0
0
0
Subindex
0