Hitachi WJ200 Series Quick Reference Manual page 10

Chapter 2 Outline
2.2 About optional correspondence of WJ200 / WL200
You can attach WJ-PN to all models of WJ200 / WL200. However, it may not support WJ-PN
depending on the product version. Please refer to the inverter specifications label on the side and
check its version (it is mentioned in the top right corner) on specifications label. (The figure shows an
example.)
WJ200/WL200 of the version listed in the table below is compatible with WJ-PN.
Model:
Input:
Output:
MFG No.
HITACHI INDUSTRIAL EQUIPMENT
2.3 About limitations of using WJ-PN
When you use WJ-PN, be aware of the following limitations:
- Modbus communication is not usable.
- Functional safety (STO) certification of the inverter becomes ineffective.
Series
WJ200
WL200
Please confirm the version.
HITACHI
Systems Co., Ltd.
Version
Ver.2.4 or later
Ver.1.0E or later
MADE IN JAPAN
4
INVERTE
R
Ver.2.4
DATE:
NE -