Table of Contents
Advertisement
3.1.3
Installing HDD Module
The ITA-3630 reserves a space for dual HDD module and HDD+CF module. Please
refer to the following instructions to install the hard disk drive.
1.
Place the HDD into 2.5" HDD holder and fill in 4 rubbers.
2.
Place two HDDs onto HDD holder, and secure them with 8 screws, then sitck
the cooling pad.
3.
Place HDD holder onto HDD bracket and secure it with 4 screws.
4.
Connect the complete HDD module to the chassis and fix it with screws.
ITA-3630 User Manual
Figure 3.3 Installing HDD Module
20
Advertisement
Table of Contents
