Setting Of Functions Of Sc-922 - JUKI SC-922 Instruction Manual

6. Setting of functions of SC-922
Functions can be selected and spec1fled.
(Caution) For the function setting procedure of any operation panel other than CP-18, refer to the In-
struction Manual for the operation panel to be used.
aJUKI
CY- 18
1} Turn O N the pow e r with
Q)
switch f) held pressed.
(The item which has been ch anged
during the previous work is dis-
played .)
If the screen display does not
change, re-carry out operation de-
scribed in step
1)
{Caution) Be sure to re-turn ON the
power switch when one or more
seconds have passed after turn-
ing It OFF. If the power switch is
re-turned ON Immediately after
turning It OFF, the sewing ma-
chine may fall to operate normally.
In such a case, be sure to turn ON
the power switch again properly.
2} To move the setting No. forward,
press
@
switch
0 .
To move the
setting
~o.
backward, press @
...
switch C).
(Caution) If the setting No. Is moved
forward (or backward}, the previ-
ous {or subsequent) content of
the setting Is confirmed. Be care-
ful when the content of a setting
Is changed (when the
8
I
<±.)
switch Is touched).
Example) Changing the maximum num-
ber of revolutions {setting No. 96)
Press
G)
switch
8
or
@
switch
....
...
0
to call sett1ng No. "96."
The current set value is displayed
on 1nd1cator
B •
Press
8
switch
0
10 times to
change the set value to "2500 "
• The content of setting of the setting No. returns to the 101tial value by pressing
8
switch
0
and
<±.)
switch
0
simultaneously.
3) After completion of the changing procedure, press
G
sw1tch
0
or
@
sw1tch
0
to confirm the up-
....
...
dated value.
(Caution) If the power Is turned OFF before carrying out this procedure, the changed content Is not up-
dated. When@ switch
8
is pressed, the display on the panel changes to the previous setting
....
No. When
@
switch
0
is pressed, the display on the panel changes to the subsequent setting
No. After co;pletion of the operation, the machine Is returned to the normal sewing state by turn-
Ing OFF the power and re-turning it ON.
-23-