Setting Of Functions Of Sc-920 - JUKI SC-920 Instruction Manual

6. Setting of functions of SC-920

Functions can be selected and specified.
(Caution) For the function setting procedure of any operation panel other than CP-18, refer to the In-
struction Manual for the operation panel to be used.
C
D
3 4
C
D
3 4
C
D
3 4
* The content of setting of the setting No. returns to the initial value by pressing
swtch 6 smultaneously.
3) After completon of the changng procedure, press
(Caution) If the power is turned oFF before carrying out this procedure, the changed content is not up-
dated. When
ting No. When
setting No. after completion of the operation, the machine is returned to the normal sewing
state by turning oFF the power and re-turning it oN.
A
B
5
6
E
7
A
B
5
6 E
7
A
B
E
5
6
7
switch 3 is pressed, the display on the panel changes to the previous set-
switch 4 is pressed, the display on the panel changes to the subsequent
– 23 –
1) Tu r n O N t h e p o w e r w i t h
swtch 7 held pressed.
(The tem whch has been changed
durng the prevous work s ds-
played.)
* I f t h e s c r e e n d  s p l a y d o e s n o t
change, re-carry out operaton de-
scrbed n step 1).
(Caution)
Be sure to re-turn oN the power
switch when one or more seconds
have passed after turning it oFF. If the
power switch is re-turned oN immedi-
ately after turning it oFF, the sewing
machine may fail to operate normally.
In such a case, be sure to turn oN the
power switch again properly.
2) To move the setting No. forward,
press
setting No. backward, press
swtch 3 .
(Caution)
If the setting No. is moved forward (or
backward), the previous (or subse-
quent) content of the setting is con-
firmed. Be careful when the content
of a setting is changed (when the
/ switch is touched).
Example)
Changing the maximum number of rev-
olutions (setting No. 96)
Press
4 to call setting No. "96."
The current set value s dsplayed
on ndcator B .
Press
setting to "2500."
swtch 3 or swtch 4 to confirm the updated value.
swtch 4 . To move the
swtch 3 or swtch
swtch 5 to change the
swtch 5 and