JUKI SC-922 Instruction Manual page 7

FOR SAFE OPERATION
~
1. To avoid electrical shock hazards, neither open the cover of the electrical box for
the motor nor touch the components mounted inside the electrical box while the
power switch Is
ON.
1. So as to avoid personal injuries, never operate the machine with the safety devices
&
such as the belt cover and the eye-guard cover removed.
2. So as to avoid personal injuries caused by being caught in the machine, during
operation, be careful not to allow your or any other person' s head, hands or clothes
to come close to the handwheel, V-belt or motor. Also, do not place anything close
to them.
3. So as to avoid Injuries to fingers and hands, be careful not to allow your or any
other person' s fingers to come close to the cloth cutting knife or the needle when
turning
ON
the power or during operation.
4. So as to avoid Injuries to fingers and hands, do not place the fingers inside the eye-
guard cover.
5. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF
the power switch and ascertain that the sewing machine does not run even if the
starting pedal is depressed when removing belt cover, motor pulley
or
V-belt.
6. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF
the power switch and ascertain that the sewing machine does not run even if
the starting pedal is depressed when performing such works as inspection or
adjustment of the sewing machine, cleaning, threading, replacing the needle, etc.
7. So as to avoid electrical shock hazards, do not operate the machine with the power
supply earth wire removed.
8. So as to avoid electrical shock hazards and accidents caused by damaged
electrical components, be sure to turn OFF the power switch before Inserting/
detaching the power plug.
9. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF
the power switch when leaving the sewing machine table.
1
o.
So as to avoid personal Injuries caused by abrupt start of the machine, turn OFF
the power switch when the electricity fails.
11. So as to avoid personal injuries caused by being caught In the machine, the motor
pulley should be attached with the pulley cover as well as the catching protection
pin.
12. When changing the set value described in the functions for maintenance (attached
with • mark) on the function setting list in this Instruction Manual, be sure to
purchase the Engineer's Manual and perform the work after fully understanding the
contents.
If the set valve Is carelessly changed, It Is In danger of causing the machine to be
broken or the performance to be deteriorated. So, be careful.
13. Be careful of handling this product so as not to pour water or oil , shock by
droppi ng, and the like since this product is a precision Instrument.
vi