8Alarm Configuration; 9About - CPcam CP-NVR-8CH User Manual

8.1.8 Alarm Configuration
Click the [Alarm] to enter the alarm setup menu, users can set up and operate the alarm mode,as show 5-11.
If need warning message displayed and real-time pop up on the WEB interface , open the [monitor alarm], and
select the appropriate type of alarm.
Choose type of alarm on menu, monitor video loss, motion detection, disk full, disk error, video mask, external
alarm.
Click [Video Pop-up], open the video loss, motion detection, hard disk full, hard disk failure, video block, video
encoder alarm pop-up linkage.
Click [prompt]open the prompt: When an alarm occurs in real-time monitoring will popup alarm window menu.
Click [Sound Pop-up], you can choose alarm tone pre-recorded on the local hard drive when an alarm occurs,
tone file in WAV format.
8.1.9 About
WEB Controls version information show here.