Table of Contents
Advertisement
[Channel]Select a channel.
[Alarm type]motion detection, video loss and video blind.
[Motion detection]detect the motion in the picture, and send alarm according to setting.
[Video loss]detect the video loss and send alarm according to setting.
[Video blind]detect the video which was covered and send alarm according to setting.
[Enable]control the alarm open and close
[Sensitivity]highest, higher, middle, low, lower, lowest
[Set area]there are totally 22*18=396 area can be set, which needs motion detection.
[Process]Set the alarming time, linkage and the handling method.
[set linkage]show in the appendix 9.1 about set alarm linkage.
Advertisement
Table of Contents
Need help?
Do you have a question about the CP-NVR-8CH and is the answer not in the manual?