Table of Contents
Advertisement
7.6.9 RS232
[Function]Select the appropriate serial protocol
[Regular]used to update firmware and adjust
[Keyboard]used specialized keyboard to control the device by serial port
[Transparent serial port] used to transmit serial port data transparently
[Net keyboard]use specialized keyboard to control the device through network
[PTZ] connect with matrix
：
Note
some models do not have RS-232 serial port, please refer to some relative data sheet.
[Baudrate]select the relative length of baud rate
[Data Bits]default: 8
[Stop Bits]default: 1
[Parity]default: None
8.1 WEB Operation
8.1.1 Network Connection
Check whether the DVR is on the network by checking B-Lamp on front panel, light indicates connection,
othervise connection error.
Set IP, subnet mask and gateway for computer and DVR. Please assign the same segment IP address without
router, need to set the appropriate subnet mask and gateway with router.
8 WEB Access
Advertisement
Table of Contents
Need help?
Do you have a question about the CP-NVR-8CH and is the answer not in the manual?
Questions and answers