CPcam CPD505ZHD Quick Start Manual

Advertisement

Quick Links

311Z
DIGITAL VIDEO RECORDER
QUICK START
Please read instructions thoroughly before operation and retain it for future reference.
717ASV_715ASV_QUICK_V0.9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPD505ZHD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CPcam CPD505ZHD

  • Page 1: Digital Video Recorder

    311Z DIGITAL VIDEO RECORDER QUICK START Please read instructions thoroughly before operation and retain it for future reference. 717ASV_715ASV_QUICK_V0.9...
  • Page 2: Front Panel

    1. SPECIAL NOTES Disclaimer We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this manual is subject to change without notice.
  • Page 3: Rear Panel

    3) EJECT Press to open / close the DVD writer (optional). 4) MENU Press to enter the main menu. 5) ENTER Press to confirm the setting. 6) SLOW In the playback mode, press to slowly play the file. 7) ZOOM In the live or playback mode, press to enlarge the image of the selected channel.
  • Page 4: Hdd Installation

    2) LOOP / INPUT (1 ~ 16CH / 1 ~ 8CH) LOOP: Video output connector. INPUT: Connect to video sources, such as cameras. Note: If you want to make a video backup with audio, please make sure whether your DVR supports the audio function, and connect audio cameras to the channels which support the audio function.
  • Page 5: Camera Connection

    Step 3: Connect the power connector and data bus connector to the HDD(s) connected. Step 4: For HDD installation to the left or middle bracket, replace the HDD bracket back to the DVR base. For HDD installation to the right bracket, skip this step. Step 5: Close the upper cover of the DVR, and fasten all the screws you loosened in Step 1.
  • Page 6: Record Setting

    3.6. Record Setting By defaults, the record function is activated when the DVR is powered on and a camera is connected. To change the record settings, press “MENU” and enter the password to go to the menu list. Then, Move to “RECORD”...
  • Page 7 Note: The audio source connected to the “Audio 1” will be recorded with the video of the “CH1”. The audio source connected to the “Audio 2” will be recorded with the video of the “CH2”. The audio source connected to the “Audio 3” will be recorded with the video of the “CH3”. The audio source connected to the “Audio 4”...
  • Page 8 Search by Time Press “MENU” to enter the menu list, and go to “ADVANCE” “ ”. Move to “QUICK SEARCH”, and press “ENTER” to enter the quick time search menu. You can search any specific events by time (Year / Month / Day / Hour / Min) and directly play the file you find.

Table of Contents