Multi-Function Analog Output (Terminal Ao1) Selection (Sn-33); Multi-Function Analog Output (Terminal Ao2) Selection (Sn-34); Pulse Output Multiplication-Gain Selection (Sn-35); Different Settings Of Sn-35 And Their Corresponding Multiple Numbers - TECO speecon 7200ma Instruction Manual

(33) Multi-Function Analog Output (Terminal AO1) Selection (Sn-33)

(34) Multi-Function Analog Output (Terminal AO2) Selection (Sn-34)

•The multi-function analog output can be set to monitor the following 12 status
items as shown below：
Sn-33, Sn-34
Setting
00
01
02
03
04
05
06
07
08
09
10
11
Note : *1: when the setting of Sn-33~34='11', the multi-function output terminals AO1, AO2 are
controlled through RS-485 port either by MODBUS or PROFIBUS protocol. Please refer to
"7200MA RS-485 MODBUS/PROFIBUS Application Manual"
•The output gain (Bn-14 and Bn-15) will determine the output voltage at multi-
function analog output at AO1, AO2 terminal. The specified multiple of 10V will
correspond to the 100% output monitored value.

(35) Pulse Output Multiplication-Gain Selection (Sn-35)

•If the multi-function output terminal (DO1) be set as pulse output (when Sn-31 or
Sn-32= 14),the final output pulse frequency is the multiple (according to Sn-35) of
the inverter output frequency. Refer to Fig. 46 for pulse signal output.
•Ex1 : when Sn-35= 0, the inverter output frequency is 60Hz, the output pulse
frequency is 60 Hz (duty = 50%).
•Different settings of Sn-35 and their corresponding multiple numbers as shown
below :
Sn-35 setting
0
1
2
3
4
Monitored contents
Frequency Command
Output Frequency
Output Current
Output Voltage
DC Voltage
VIN Analog Command
AIN Analog Command
AUX Analog Command
PID Input
PID Output1
PID Output2
Comm. Control
Pulse output frequency
1F： 1 ×inverter output frequency
6F： 6 ×inverter output frequency
10F：10 ×inverter output frequency
12F：12 ×inverter output frequency
36F：36 ×inverter output frequency
Description
Input
0 ~ max. frequency
0 ~ max. frequency
0 ~ rated current
0 ~ rated voltage
220V class 0~400V
440V class 0~800V
0 ~ 10 V
4 ~ 20 mA
0 ~ 10 V
0 ~ max frequency
0 ~ max frequency
0 ~ max frequency
*1
0~100%
Applicable freq. range
93
Output
0~10V
3.83∼400.0Hz
2.56∼360.0Hz
1.54∼210.0Hz
1.28∼180.0Hz
0.5 ∼ 60.0Hz