Scope Of Delivery; Maintenance Procedure; Support - Nufer Medical CERATHERM 600-3 Instruction Manual

5
Instruction Manual CERATHERM 600-3
1.4

Scope of Delivery

The CERATHERM 600-3 radiant heater is supplied with a mains cable, instruction manual
and declaration of conformity. Approved accessories are described in chapter 16.
1.5

Maintenance Procedure

No particular maintenance is required for the CERATHERM 600-3 radiant heater, except for
the annual safety check described in chapter 20 of the CERATHERM 600-3 service manual.
The unit does not have any special wear parts.
1.6

Support

Maintenance for the CERATHERM 600-3 radiant heater must only be performed by persons
who have been authorised by NUFER MEDICAL or the local trained sales partner. If repair
work is required, the unit must be returned to the NUFER MEDICAL sales partner located in
your country, along with a completed 'Repair Request Form' (see chapter 17). Further
information is available from the customer service department of:
14.171.C_GA_Ceratherm_600_3_EN.docx
NUFER MEDICAL AG
Morgenstrasse 148
CH-3018 Bern / Switzerland
Tel. +41 (0)31 958 66 66
Fax +41 (0)31 951 46 73
info@nufer-medical.ch
www.nufer-medical.ch
Nufer Medical AG / 04.07.2014 / DU Seite 5 / 32