Introduction; General; Purpose; Electromagnetic Emissions And Electromagnetic Compatibility - Nufer Medical CERATHERM 600-3 Instruction Manual

4

Instruction Manual CERATHERM 600-3

1.

Introduction

1.1

General

This instruction manual describes the intended use, operation, specifications, care and
maintenance of the CERATHERM 600-3 radiant heater.
Read through this instruction manual carefully and familiarise yourself with the content before
operating the CERATHERM 600-3. To ensure that the unit is used safely, follow the
operating guidelines and explanations that are given in this instruction manual. The
CERATHERM 600-3 must only be operated by persons who have been properly trained and
instructed, under the supervision of a skilled medical specialist who is familiar with the
currently known risks and benefits of using a radiant heater.
NUFER MEDICAL is in no way responsible for errors or accidents that are the result of non-
compliance with the instructions on operation, care, maintenance and any other content
given in this instruction manual. The same applies for repair work performed on the unit if
such work is performed by unauthorised persons or if unapproved original components are
used.
The CERATHERM 600-3 must only be used for its intended purpose as per chapter 1.2 of
this instruction manual.
Keep this instruction manual in a place where it can be referred to whenever needed. In the
event of technical problems or malfunctions, please inform your local NUFER MEDICAL
sales partner immediately. If you do not understand the content of this instruction manual,
contact your local NUFER MEDICAL sales partner for more information.
1.2

Purpose

The CERATHERM 600-3 radiant heater is designed to preheat examination and baby
changing tables and to maintain the body temperature of new-borns, children and adults.
1.3

Electromagnetic Emissions and Electromagnetic Compatibility

The CERATHERM 600-3 radiant heater meets all the requirements of the
industrial standard.
Accordingly, the unit's electromagnetic emissions are very low and cannot impair the
functioning of electronic equipment located in the immediate vicinity.
Ensure that any electronic equipment that is used in the vicinity of the CERATHERM 600-3
radiant heater also meets the requirements of
emissions that are too high can impair the radiant heater's ability to function safely.
Do not use any wireless communication devices within 5 metres of the radiant heater. The
mains power supply to which the CERATHERM 600-3 radiant heater is connected must meet
the legal and technical requirements for a hospital or clinic mains power supply in terms of
dielectric strength, frequency stability and pulse spikes etc. Ensure that the radiant heater is
not exposed to electrostatic discharge.
14.171.C_GA_Ceratherm_600_3_EN.docx
. Equipment with electromagnetic
EN 60601-1-2
Nufer Medical AG / 04.07.2014 / DU
EN 60601-1-2
Seite 4 / 32