Cleaning/Disinfection; 12.1 General Information - Nufer Medical CERATHERM 600-3 Instruction Manual

24
Instruction Manual CERATHERM 600-3
12.

Cleaning/Disinfection

12.1 General information

The radiant heater must be kept clean and dry. We recommend regular
cleaning to preserve the unit's full functionality. Use a cloth that has been
moistened with lukewarm water. Alcoholic cleaning agents must be diluted. Do
not use any abrasive cleaning agents.
Before cleaning, ensure that the radiant heater has cooled down and
disconnect it from the mains power supply (by disconnecting the mains cable).
Ensure that no liquid enters the unit or the unit socket.
If any liquid or powder is spilled, disconnect the radiant heater from the power
supply immediately by disconnecting the mains cable. Clean and dry the unit
carefully.
If liquid has entered the unit, discontinue operation of the unit. Contact
customer service (see chapter 1.6).
The radiant heater must not be autoclaved or immersed in liquid. The radiant
heater must only be disinfected by wiping over surfaces. Only alcoholic
disinfectants may be used.
14.171.C_GA_Ceratherm_600_3_EN.docx Nufer Medical AG / 04.07.2014 / DU Seite 24 / 32