Accessories; Wall Mount, Fixed, Non-Pivoting (Optional) - Nufer Medical CERATHERM 600-3 Instruction Manual

27
Instruction Manual CERATHERM 600-3
Weight
Material, housing
Material, chassis
Material, reflector
*NUFER MEDICAL reserves the right to make changes to the unit that may affect these specifications, at any time and
without notice.
16.

Accessories

Regarding the accessories approved for the CERATHERM 600-3 radiant heater:
With regard to assembly and use, observe the assembly and operating
instructions supplied with the accessories. NUFER MEDICAL is in no way
responsible for errors or accidents that are the result of non-compliance with
the instructions on assembly, operation, care, maintenance and any other
content given in the instruction manual supplied with the accessories. The
same applies for repair work performed on the accessories if such work is
performed by unauthorised persons or if unapproved original components are
used.

16.1 Wall mount, fixed, non-pivoting (optional)

Article number: 521A-60023-3
14.171.C_GA_Ceratherm_600_3_EN.docx
4.3 kg (without accessories)
ABS (temperature-resistant plastic)
CNS (stainless steel)
CNS (stainless steel)
Non-pivotable. Distance from wall adjustable as per drawing.
Nufer Medical AG / 04.07.2014 / DU Seite 27 / 32