Connecting The Framelock Cable; Figure 7-1 Sun Xvr-4000 Graphics Accelerator Stereo/Framelock Connectors - Sun Microsystems Sun Fire V880z Installation And User Manual

Connecting the Framelock Cable

Cable the Sun graphics accelerators to be framelocked before configuring your
system for framelock (described in "Enabling Framelocking on Graphics
Accelerators" on page 59).
1. Locate the master Sun XVR-4000 graphics accelerator I/O back panel on the rear of
your Sun Fire V880z server and its stereo/framelock DIN7 connector (
13W3B
FIGURE 7-1
2. Connect the framelock cable master connector to the stereo/framelock DIN7
connector (
3. Connect the slave cable connector to a slave Sun XVR-4000 graphics accelerator
stereo/framelock DIN7 connector.
If the framelock cable is not long enough, you can use a standard 7-pin DIN
extender cable between the slave connector of the framelock cable and the DIN7
connector on the slave system.
56 Sun Fire V880z Server and Sun XVR-4000 Graphics Accelerator Installation and User's Guide • May 2003
13W3A
Sun XVR-4000 Graphics Accelerator Stereo/Framelock Connectors
).
FIGURE 7-2
Stereo/framelock (DIN7)
).
FIGURE 7-1