8
7.1.5 Normal Mode Turn-off Procedures (Single)
1
During normal mode, the following screen appears and LEDs illuminate as follows.
LOAD PROTECTED
ON LINE
2
Press the OFF button
after you hear one beep. The LCD shows the message: 'SHUTDOWN UPS?'. Select
'YES' and press the function key below the symbol '
3
After you confirm your selection, the UPS transfers from normal mode into bypass
mode, the following screen appears and LEDs illuminate as follows.
LOAD UNPROTECTED
ON AUTO BYPASS
Ultron DPS Series
During normal mode, LEDs illuminate as follows.
UNI T : # 1 . 1
BYPA.
MAIN
UNI T : # 1 . 1
BYPA.
MAIN
2010 - 06 - 01
11 : 59 : 59
on the control panel for three to ten seconds and release it
2010 - 06 - 01
11 : 59 : 59
7-10
Fault
Fault
Fault