Replacing Consumable Items; Toner Cartridge Replacement - Oki MC560 User Manual

R
EPLACING CONSUMABLE ITEMS
T
ONER CARTRIDGE REPLACEMENT
To avoid toner wastage and possible toner sensor errors, do not
change the toner cartridge(s) until "TONER EMPTY" is displayed.
The toner used in this machine is a very fine dry powder. It is contained in four cartridges:
one each for cyan, magenta, yellow and black.
Have a sheet of paper handy so that you have somewhere to place the used cartridge while
you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the new one came in. Follow
any regulations, recommendations, etc., which may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not enough, use a cool, damp
cloth to remove any residue.
Do not use hot water, and never use solvents of any kind. They will make stains permanent.
If you inhale any toner or get it in your eyes, drink a little water or
bathe your eyes liberally in cold water. Seek medical attention
immediately.
1. Gently raise the scanner.
2. Press the cover release (a) and open the MFP's top cover (b) fully.
If the MFP has been powered on, the fuser may be hot. This area is
clearly labelled. Do not touch.
CAUTION!
WARNING!
a
WARNING!
Maintenance > 81