Comparison Of Dives With Mb Level L0 And Mb Level L5; Terminology; Display During Mb No-Stop Phase - Uwatec Aladin TEC 3H User Manuals

4.8.1 Comparison of dives with MB level L0 and MB level L5

When two Aladin TEC 3H are used simultaneously, one unit is set for example to MB level L5, the
other to L0, the no-stop time will be shortened and level stops will be required before the diver has
the obligation of a decompression stop. These additional level stops help dissipate the microbubbles.
Microbubble accumulation
at the end of dive
Time
L0
NO STOP
NO STOP
L5
STOP

4.8.2 Terminology

This chapter will exclusively deal with terminology and display features used while diving with MB levels.

Display during MB no-stop phase

MB no-stop time
Remaining time at a
respective depth allowing
ascent without level stop.
DEPTH
DIVE TIME
NO
NO STOP
CNS O %
2
Nitrogen
2 x
loading bar
MB level
relative to LO
activated
Level L2
is active
35.7m
(Tank pressure
> MB level active
> No-stop time relative to L0
> Temperature
> (Tank pressure)...
L0
L5
NO STOP
NO STOP
STOP
MB no-stop phase
Dive phase during which surfacing is
possible without MB level stop.
Time
16min Dive time
Current depth
Max depth
>) Temperature
and time of day
Diving with microbubble (MB) levels
Decompression values
DECO
STOP
Decompression obligation
DECO
Level stop values
STOP
Level stop phase
9min MB no-stop time
3m/10ft
6m/20ft
9m/30ft
12m/40ft
15m/50ft
35