Diving With Microbubble (Mb) Levels - Uwatec Aladin TEC 3H User Manuals

Diving with microbubble (MB) levels

4.8 Diving with microbubble (MB) levels
F
NOTE:
The following chapter deals with the characteristics of diving with microbubble (MB) levels.
Microbubbles are tiny bubbles that can build up inside a diver's body during any dive and normally
dissipate naturally during an ascent and on the surface after a dive. Dives within no-stop time and
observance of decompression stops do not prevent the formation of microbubbles in the venous blood
circulation.
Dangerous microbubbles are those migrating into the arterial circulation. The reasons for the migration
from the venous blood circulation to the arterial circulation can be a great many microbubbles collecting
in the lungs. Scubapro has equipped Aladin TEC 3H dive computers with a new technology to protect
from microbubbles.
The diver chooses – according to his/her needs – an MB level and influences through it the level of
protection from microbubbles. Diving with MB levels requires additional ascent stops (level stops), the
ascent is slowed down and the body gets more time to desaturate. This works contrary to the formation
of the microbubbles and increases safety.
Aladin TEC 3H features 6 microbubble levels (L0-L5). Level L0 corresponds to Scubapro's well-
known decompression model ZH-L8 ADT and does not require level stops due to microbubble
formation. Levels L1 to L5 offer additional protection from microbubble formation with level L5 offering
the highest protection.
Similar to the display of information during decompression dives or dives within no-stop time, Aladin
TEC 3H displays depth and duration of the first level stop as well as the total time of ascent as soon as
the MB no-stop time has run out. As the MB no-stop time is shorter than the ordinary no-stop time a
diver will be required to carry out a stop (level stop) sooner than a diver using level L0.
If a diver ignores a required level stop, Aladin TEC 3H will cascade to a lower MB level and the dive
can not be completed with the initially chosen MB level. E.g. if a diver sets level L4 on Aladin TEC 3H
prior to the dive and during the dive ignores the recommended stops Aladin TEC 3H will automatically
adjust the setting to level L3 or lower.
34