Complete A Dive With Mb Levels - Uwatec Aladin TEC 3H User Manuals

Diving with microbubble (MB) levels
Tempo
Level stop duration

4.8.5 Complete a dive with MB levels

Repetitive dives and MB levels: If during a dive a level stop is being ignored and the diver starts another
descent shortly afterwards, Aladin TEC 3H might immediately request level stops. To complete the dive
with the initially set MB level all level stops must be observed.
40
3m/10ft
Decompression
stop duration
Level stop duration
L0
DECO
STOP
L5
DECO
STOP
STOP
STOP
Decompression stop depth = level stop depth
A dive with MB levels is completed the same way as a dive
without MB levels (L0), save for the following exceptions:
If the MB level has been reduced during the dive, Aladin TEC
S
3H will display a flashing MB level symbol and the current MB
L
O
level for five minutes after reaching the surface. The dive is then
W
completed and Aladin TEC 3H changes to user mode with the
MB level switching back to the original MB setting.
L0
NO STOP
L5
NO STOP