Table of Contents
Advertisement
Operation
2.2 Water contacts
On submerging in water the water contacts switch on SPORT automatically.
If you have chosen the option "Water contacts off" ("set 1", ->33), SPORT will turn on with a delay
of up to 1 minute into the dive. This will affect functioning of the computer.
Make sure that the computer is on before starting the dive.
2.3 Introduction to Scubapro LogTRAK
LogTRAK is the software that allows Aladin SPORT to communicate with a Windows-based PC or Mac
OS.
In order to take advantage of any of these features, you need to establish a communication between
your PC and Aladin SPORT with a dongle.
To start the communication
1.
Connect the dongle to your PC
2.
Launch LogTRAK on your PC
3.
Select the IrDa port where the dongle is connected
Extras -> Options -> download
Select the port that is used for Aladin SPORT dongle.
4.
Place the Aladin SPORT on the dongle.
Download dive profiles
From LogTRAK, by selecting Dive -> Download Dives you can transfer the SPORT Logbook to your
PC or Mac.
There are three main views each showing a specific part of your dive logs:
Profile shows the graphical data of the dive.
Details about the dive, where you can edit, for example, the equipment and tank information.
Location, shows your dive site on the world map.
The selection tabs for views are on the left side of the main window.
10
! WARNING
Advertisement
Table of Contents
