Advertisement
III. Operational Examples
a) Assuming that the unit was connected using a 4-wire WYE setup to a three-phase circuit, scrolling through the
OPERATIONAL menu buttons (blue buttons)
the following screens examples. Note: Alarms example is not shown.
Figure 4. A captured transient example
Figure 6. Real-time vector diagram of current
Figure 8. Accumulated data for W, VA, Vars
4
www.aemc.com
(Figure 1, bullet 9) (from left to right) would result in
Figure 5. Current harmonics in real-time
Figure 7. Trend data of wattage consumed
Technical Assistance (800) 343-1391
Advertisement
