Advertisement
I. General Layout & Functionality
a) The PowerPad™ has been laid out with ease of use and maximum functionality in mind. Looking at the top of the
unit from left to right, the unit has three color-coded current inputs
and C Phase) and four color-coded voltage inputs
Neutral) (Figure 1, bullet 1). One thing to note is that the Current Probes are intelligent. The unit auto-detects
and auto-configures itself according to which probes are connected to it.
b) Just to the right of the display on the right-hand-side is an optically isolated RS-232 port
1, bullet 2). This allows the user to simultaneously connect to a power panel and the computer without the
danger due to an accidental fault.
c) Just below the RS-232 port is a power port
charges the internal NiMH battery pack. The battery pack has a 10-hour continuous operational capacity and a
96-hour record mode capacity can be charged at any level of discharge. Power to this port can be 120/240V,
50/60Hz. PowerPad™ can be used while charging.
d) There are four operational menu buttons
(Figure 1, bullet 10) From top-to-bottom they are SETUP
and HELP
The blue buttons on the bottom right are the MAIN MODE function buttons
From left-to-right and then top-to-bottom they are: TRANSIENT MODE
WAVEFORM MODE
MODE
.
e) There are six sub-menu buttons
user to choose the sub-menus available in a particular menu mode. The function for each of these buttons
change according to the display function or mode in use. The sub-menus available in the waveform mode for
example are
f)
The arrow keys
right-side of the display
g) The enter button
(Figure 1, bullet 7)
2
www.aemc.com
.
, ALARM MODE
allow the user to move within the menus such as the side-bar menu seen on the
(Figure 1, bullet 3)
allows the user to choose and enter changes to the setting within the menus.
(A Phase, B Phase, C Phase, and
(Figure 1, bullet 4). This supplies power to the unit and
(light gray buttons) located on the lower left front panel.
, SNAPSHOT
, RECORDING MODE
just below the screen (Figure 1, bullet 6). These allow the
(Figure 1, bullet 5)
Technical Assistance (800) 343-1391
(A Phase, B Phase,
, PRINT
. (Figure 1, bullet 9)
, HARMONIC MODE
, and POWER/ENERGY
(Figure
,
,
Advertisement
