J 2. Using the provided metal screw, secure the horizontal
stabilizer.
J 3. Connect the provided elevator linkage to the outer hole
of the elevator horn, and to the outer hole on the elevator
servo arm.
WING INSTALL
6
J 1. Route the Y-Lead through the wing opening of the
fuselage and the fuselage canal, so it goes to the front area to
be connected to the receiver.
J 2. Remove the protections of the aileron servo linkages
and ensure the servos are correctly secured. If needes, add a
drop of foam safe CA to secure the servos.
J 3. Insert the carbon wing joiner into one wing panel.