Power Button - Vecow MTC-4015 User Manual

2.2.1 Reset Tact Switch
LAN1
HDD
RESET
POWER
PWR
It is a hardware reset switch. Use this switch to reset the system without power
off the MTC-4015. Press the Reset Switch for a few seconds, then reset will be
enabled.

2.2.2 Power Button

LAN1
HDD
RESET
POWER
PWR
The Power Button is a non-latched switch with dual color LED indication. It
indicates power status: S0, S3 and S5. More detail LED indications are listed as
follows:
LED Color
Solid Blue
Solid Orange
To power on MTC-4015, press the power button and then the blue LED is
lightened. To power off MTC-4015, you can either command shutdown by OS
operation, or just simply press the power button.
If system error, you can just press the power button for 4 seconds to shut down
the machine directly.
Please do note that a 4-second interval between each 2 power-on/ power-off
operation is necessary in normal working status. (For example, once turning
off the system, you have to wait for 4 seconds to initiate another power-on
operation).
LAN2 DP
LAN2 DP
Power Status System Status
S0 System working
Suspend to RAM, System off with standby
S3, S5
power
DVI-D SIM 1 SIM 2
CFast
DVI-D
SIM 1 SIM 2
CFast
GETTING TO KNOW YOUR MTC-4015
USB 3.0 USB 2.0
USB 3.0 USB 2.0
11