Temperature And Frost Alarm; Activating / Deactivating The The Temperature And Frost Alarm - Auriol Z31130 Operation And Safety Notes

Operation

Temperature and frost alarm

Press the – button
Hold the – button down for 3 seconds. The maximum temperature display
blinks. Press the + or – button to set the values.
Press the MODE button
display blinks. Press the + or – button to set the values.
Press the MODE button to confirm your setting.
Activating / deactivating the the temperature
and frost alarm
If more than one outdoor sensor is activated, press the channel button
select one.
Press the – button
If the frost alarm alarm is activated, the corresponding symbol
the outdoor temperature. The alarm signal sounds at –1 °C to + 3 °C.
If the temperature alarm is activated, the corresponding symbol appears next to the
outdoor temperature. The alarm signal sounds at the set values.
If the temperature and frost alarm are activated, both symbols appear in the display.
168 GB/MT
to get top the temperature alarm mode.
36
to confirm your setting. The minimum temperature
34
repeatedly to activate the temperature and frost alarms.
36
to
37
appears next to
23