Tablet holder
Introduction
This chapter contains information on the following subjects:
Attaching the rear headrests
Handling the holder
External devices (e.g. tablets, smartphones etc.) with a min. size of 122 mm and
a max. size of 195 mm may be attached in the holders.
The maximum permissible load of the holder is 750 g.
CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
Attaching the rear headrests
Fig. 96 Inserting: adapter / holder
91
91
Fig. 97 Removing: Holder / Adapter
Read and observe
on page 91 first.
›
Toinsert, attach the opened adapter to the guide rods of the front headrest
and clip in the direction of arrow
›
Clip the holder into the adapter in the direction of arrow
›
To remove, pull on the securing tab
holder in direction of arrow
›
Press the adapter and remove from the guide rods of the headrest in the di-
rection of the arrow
.
5
WARNING
Carefully clip in the adapter - risk of finger injury.
Handling the holder
Fig. 98 Tilt and rotate the holder
» fig. 96
»
.
1
.
2
in direction of arrow
A
3
out of the adapter
» fig.
97.
4
Useful features
and take the
91