Fig. 243 Inner part of the light: Basic light/light with LED diodes
Read and observe
and
Outer part of the lamp
›
Rotate the version with the light bulb
move it from the lamp housing.
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Replace the holder with the bulb into the lamp housing and turn in a clock-
wise direction to the stop.
Inner part of the light
›
Unscrew the lamp holder
» fig. 242
kit, and remove the lamp holder from the light assembly.
›
Turn the respective light bulb
» fig. 243
move it from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder into the light and screw in.
204
Do-it-yourself
on page 199 first.
» fig.
242counter-clockwise and re-
B
or use the screwdriver from the car tool
until it stops anti-clockwise and re-
Replacing the bulbs in the tail lamp assembly - Variant 2
Fig. 244 Outer part of the light: Basic light/light with LED diodes
Read and observe
and
›
Turn the version with the light bulb
›
Remove the socket with the bulb from the lamp housing in direction of arrow
.
2
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Refit the holder with the bulb into the lamp housing and turn opposite to the
direction of the arrow
.
1
on page 199 first.
in the direction of arrow
B
» fig.
244.
1