›
Fit the connector.
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» fig. 238
and tighten.
›
Insert the guard and push it gently until it locks into place.
Change bulb for fog lights switch - Variant 2
Fig. 239 Remove the fog lamp / bulb change - Variant 2
Read and observe
and
Remove the cover and headlight
›
Insert the clamps for removing the full wheel trims into opening
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
using the screwdriver from the tool kit.
B
›
Remove the headlight in the direction of arrow
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
202
Do-it-yourself
on page 199 first.
.
2
.
3
.
4
.
5
›
Turn the socket with the bulb to the stop in the direction of the arrow
›
Remove the socket with the bulb in the direction of arrow
›
Insert a new socket with the new bulb into the headlight and turn in the op-
4
posite direction of arrow
›
Fit the connector.
Refit the headlight and cover
›
Replace the fog light by inserting it in the opposite direction of the arrow
» fig. 239
and tighten.
›
Insert the guard and push it gently until it locks into place.
Changing the bulb for the licence plate light
Fig. 240 Remove the number plate light / replace the bulb
Read and observe
›
Push in the light in the direction of arrow
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
» fig.
239.
A
.
1
as far as it will go.
6
and
on page 199 first.
» fig.
240until it is detached.
1
and remove it.
2
.
6
.
7
3
.
3
.
1