Skoda octavia Owner's Manual page 164

Automatic Car Washes
The usual precautionary measures must be taken before washing the vehicle
(e.g. closing the windows and the tilt/slide roof etc.).
If your vehicle is fitted with any particular attached parts (e.g. spoiler, roof rack
system, two-way radio aerial etc.) it is best to consult the operator of the car
wash system beforehand.
After an automatic wash with wax treatment, the wiper blades should be
cleaned with cleaning agents specially designed for the purpose, and then de-
greased.
Pressure Washers
When washing the vehicle with a high-pressure cleaner, the instructions for
use of the equipment must be observed. This particularly applies to instruc-
tions regarding the pressure and spraying distance from the vehicle surface.
Maintain a sufficiently large distance to the parking aid sensors and soft mate-
rials such as rubber hoses or insulation material
WARNING
When washing your vehicle in the winter: Water and ice in the braking
■
system can affect the braking efficiency – risk of accident!
Take care when cleaning the underbody or the inside of the wheel wells -
■
there is a risk of injury from sharp metal parts!
CAUTION
Do not wash the vehicle in direct sunlight, do not exert pressure on the body
■
while washing. The temperature of the washing water should be no more than
60 °C max. - otherwise there is a risk of damaging the vehicle paint.
Before driving through a car wash fold in the exterior mirrors - There is a risk
■
of damage.
CAUTION
Washing the vehicle with high-pressure cleaners
Films should not be washed with any high-pressure cleaners - There is a risk
■
of damage.
Do not aim the water jet directly at the lock cylinders or the door or opening
■
joints when washing the vehicle in the winter – there is a risk of freezing.
The sensors of the parking aid can be sprayed only for a short time and there
■
must be a minimum distance of 10 cm - there is a risk of damage.
162
General Maintenance
» .
Exterior vehicle care

Read and observe and
Vehicle compo-
Circumstances
nents
Spilled fuel
No water drop-
lets form on the
Paint
paint
Paint has gone
matt
Plastic parts Soiling
Chrome
and anodized Soiling
parts
Films Soiling
Windows
and external mir- Soiling
ror glass
Head / tail lights Soiling
Soiling
Reversing camera
Snow/ice
Door lock cylin-
Snow/ice
ders
Wipers / wiper
Soiling
blades
Wheels Soiling
a)
Mild soap solution = 2 tablespoons of natural soap to 1 litre of lukewarm water.
The jack is maintenance-free. If necessary, the moving parts of the jack should
be lubricated with a suitable lubricant.
on page 161 first.
Remedy
Clear water, cloth, (clean as soon as
possible)
Use hard wax preserve (at least twice a
year), apply wax to clean and dry body
Use polish, then wax (if the polish does
not contain any preservative ingredi-
ents)
Clear water, cloth / sponge, possibly
cleaners provided for this purpose
clear water, cloth, possibly cleaners
provided for this purpose, clean then
polish with a soft dry cloth
Soft sponge and mild soap solution
Wash with clean water and dry with a
wipe specifically for that purpose
Soft sponge and mild soap solution
Wash with clean water and dry with a
soft cloth
Hand brush / de-icer
De-icing fluid specifically for that pur-
pose
Windscreen cleaner, sponge or cloth
Clear water, then apply appropriate
substance
a)
a)
