Safety; Observing Instructions; Warning Signs And Explanation Of Symbols; Validity - Rotex HPSU compact 304 System Instructions

1

Safety

1.1 Observing instructions

This instruction is the >> Original Version << in your language.
All the activities required for operation and setting the parameters
are described in this instruction manual. All parameters needed
for trouble-free operation have been configured at the factory.
Please read through this manual carefully before operating
the heating system or before adjusting the settings for it.
Make a note of the preset values before you make any
changes to the unit configuration.
Relevant documents
– ROTEX HPSU compact; the associated installation and oper-
ating instructions the operating instructions for the end cus-
tomer and the operating manual for the operator.
– External unit for ROTEX HPSU compact; the associated
installation and operating instructions.
– With connection of a ROTEX Solaris solar system; the asso-
ciated installation and operating instructions.
– With connection of a ROTEX HP convectors; the associated
installation and operating instructions.
The guides are included in the scope of supply for the individual
units.

1.2 Warning signs and explanation of symbols

Meaning of the warnings
Warnings in this manual are classified according into their
severity and probability of occurrence.
DANGER!
Draws attention to imminent danger.
Disregarding this warning can lead to serious injury or
death.
WARNING!
Indicates a potentially dangerous situation.
Disregarding this warning can result in serious injury
or death.
CAUTION!
Indicates a situation which may cause possible
damage.
Disregarding this warning can lead to damage to
property and the environment.
This symbol identifies user tips and particularly useful
information, but not warnings or hazards.
Special warning signs
Some types of danger are represented by special symbols:
Electric power
FA ROTEX RoCon HP - 03/2013

1.2.1 Validity

Some information in this manual has limited validity. The validity
is highlighted by a symbol.
Only valid for ROTEX HPSU compact with heating and
cooling function
Order number
Notes related to order numbers are identified by the shopping
cart symbol .
Handling instructions
Instructions on actions are shown as a list. Actions of which
the sequential order must be maintained are numbered.
Results of actions are identified with an arrow.

1.3 Avoid danger

The ROTEX HPSU compact is state-of-the-art and is built to meet
all recognised technical requirements. However, improper use
may result in serious physical injuries or death, as well as
property damage.
To avoid danger, only operate the ROTEX HPSU compact:
– as stipulated and in perfect condition,
– with an awareness of the safety and hazards involved.
This assumes knowledge and use of the contents of this manual,
the relevant accident prevention regulations and the recognised
safety-related and occupational medical rules.
WARNING!
This unit is not intended for use by persons (including
children) with impaired physical, sensory or mental
faculties or persons with insufficient experience and/or
expertise unless supervised by a person responsible
for ensuring their safety or are given instruction by this
person on how to use the unit.

1.4 Proper use

The ROTEX RoCon controller must be used exclusively in the
type HPSU compact. The ROTEX RoCon controller must only
operated only according to the indications in this manual.
Any other use outside the intended use is considered as
improper. The operator alone shall bear responsibility for any
resulting damage.
Use as intended also involves compliance with maintenance and
inspection conditions. Spare parts must at least satisfy the
technical requirements defined by the manufacturer. This is the
case, for example, with original spare parts.
1 x Safety
3