Eaton S611 User Manual page 11

CAUTION
If the AUTO Reset mode setting is used with level sensing,
CAUTION must be exercised to assure that any restart
occurs in a safe manner. Motor restart may occur
immediately and unexpectedly after any fault condition has
cleared.
CAUTION
In the AUTO Reset mode, CAUTION must be exercised to
assure that any restart occurs in a safe manner.
WARNING
Make sure you read and understand the procedures in
this manual before you attempt to set up or operate the
equipment.
WARNING
Do not work on energized equipment unless absolutely
required. If the troubleshooting procedure requires
equipment to be energized, all work must be performed
by properly qualified personnel, following appropriate
safety practices and precautionary measures.
WARNING
Setting the Overload Trip Class parameter to OFF
disables this feature resulting in no thermal overload
protection for the motor.
WARNING
Only apply 24 Vdc to the communication module
fieldbus connection. Use of any other voltage may result
in personal injury, property damage and damage to the
module.
S611 Soft Starter MN03902011E—May 2012 www.eaton.com
www.comoso.com
S611 Soft Starter
ix