Table of Contents
Advertisement
2000
1
15. POWER DOWN BUTTON
Press this button to decrease the power setting for the selected mode.
16. RELEASE BUTTON
To remove an accessory switching connector, press this button to release the accessory, then pull the
connector straight away from the unit.
17. FOOTSWITCH
Used to activate the unit when a Footswitched Pencil or Bipolar Forceps are used.
18. BIPOLAR FORCEPS
Must be used with a footswitch for activation.
19. FOOTSWITCHED PENCIL
Use when footswitch activation is preferred.
Back Panel Controls
1. VOLUME CONTROL
Adjusts volume of the audible tone generated when the power activation button is pressed. To increase
volume, insert a screwdriver and rotate clockwise until resistance is felt. Do not force adjustment past
the resistance point. For safety reasons, the tone cannot be completely turned off.
2. WALL MOUNTING STUDS
Used with standard wall mounting kit, Cat. No. 7-796-20 (see the mounting kit for instructions).
Instrument may also be mounted on optional mobile pedestal stand (Cat. No. 7-796-1). Note: The
7-796-20 mounting kit must be used to mount the unit on the mobile pedestal stand.
6
Figure 2: Back Panel Controls
2
Hide quick links:
Advertisement
Table of Contents
