Check The Engine Oil Level - Bomag BT 60/4 Operating Instructions Manual

Vibratory tampers
Table of Contents

Advertisement

5.8 Check the engine oil level

Caution
Check the engine oil level with highest care, to
avoid over or underfilling of the engine. Under-
filling can damage the engine. Overfilling caus-
es excessive development of smoke and can
also lead to engine damage
i
Note
The engine cannot be started if the engine oil level
is too low.
Stand the tamper on flat and level ground.
G
Shut down the engine.
G
Fig. 33
Pull out the dipstick (Fig. 33) and wipe it clean
G
with a lint-free, clean cloth.
Fig. 34
The oil level must reach the bottom edge of the
G
filler bore (Fig. 34), maximum level.
To check the oil level insert the dipstick, but do
G
not screw it in.
If the oil level is too low top up oil immediately.
G
Push the dipstick in again.
G
For quality of oil refer to the table of fuels and
lubricants.
After approx. 1 minute. check the oil level
G
again with the engine shut down.
BT 60/4, BT 65/4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bt 65/4

Table of Contents