Check, Adjust The Valve Clearance - Bomag BT 60/4 Operating Instructions Manual

Maintenance every year
5.14 Check, adjust the valve
clearance
i Note
Check and adjust only when the engine is cold (20
+/- 10 °C). If necessary have this work performed
by a specialist workshop. Valve clearance:
Intake valve (IN) = 0.15 mm (0.006 in)
Exhaust valve (EX) = 0.20 mm (0.008 in)
Fig. 43
Remove the top engine cover (Fig. 43).
G
Fig. 44
Unscrew the fastening screws for the cylinder
G
head cover (Fig. 44).
Caution
Do not apply force to remove the cylinder head
cover.
Replace the cylinder head cover if it is dented.
BT 60/4, BT 65/4
Fig. 45
Insert the screw driver into the recess (Fig. 45)
G
and take the cylinder head cover carefully off.
Fig. 46
Remove the recoil starter (Fig. 46).
G
Fig. 47
Align the alignment mark ∆ on the flywheel rib
G
with the top bore in the fan cover (Fig. 47).