It Setup For Device History - ZOLL AED 3 Administrator's Manual

3. Press Save at the bottom right of the screen to save the changes. The AED
displays the message SAVING CONFIGURATION, PLEASE WAIT. When the
AED has saved the configuration, it displays the Advanced Configuration
window.

IT Setup for Device History

1. Press the Device History Wi-Fi icon.
2. Press the IT Setup button to access the Device History Wi-Fi Settings win-
Device History
dow.
Wi-Fi icon
3. Press the Network Settings icon. The Network Settings window displays.
4. In the DHCP (Dynamic Host Configuration Protocol) field, select ON or OFF:
Network
Settings icon
• If you select ON, all necessary information is obtained from the network.
Press OK and go to step 6.
• If you select OFF, all of the network setup fields display in the Network
Settings window. Go to step 5 to enter the static information.
5. You can either keep all of the displayed default settings and press OK, or
you can enter information in the following fields:
Local IP Address - Use the numeric keypad to enter your Local IP address
•
(format is xxx.xxx.xxx.xxx where xxx = 000-255). Press OK.
Gateway IP Address - Use the numeric keypad to enter your Gateway IP
•
address (format is xxx.xxx.xxx.xxx where xxx = 000-255). Press OK.
Subnet Mask - Use the numeric keypad to enter your Subnet Mask (format
•
is xxx.xxx.xxx.xxx where xxx = 000-255). Press OK.
• Primary DNS (Domain Name Server) IP Address - Use the numeric keypad
to enter your Primary DNS IP address (format is xxx.xxx.xxx.xxx where
xxx = 000-255). Press OK.
• Secondary DNS IP Address - Use the numeric keypad to enter your
Secondary DNS IP Address (format is xxx.xxx.xxx.xxx where
xxx = 000-255). Press OK.
6. Press OK to save the Network settings.
7. Press the Server Settings icon and enter information in the following fields:
Mode: Select URL or IP.
•
Server
Address - The default is dxsvc.zollonline.com. Use the alpha-numeric
•
Settings
icon
keypad to change this default only if your URL/IP is different than the
default.
NOTE If you are not using the default value, you need to make an entry in
the DNS table for the default value, and you will have to import a new SSL
root certificate. For detailed information on how to import a root certificate,
see "Importing Files from a USB Flash Drive" on page 16.
62 ZOLL AED 3 Administrator's Guide 9650-000752-01 Rev. D