General Settings; Power System; Overview; Identifiers - ABB REL670 Operator's Manual

1MRK506276-UUS B
9.2
9.2.1
9.2.1.1
9.2.1.2
9.2.1.3
9.2.2
9.2.2.1
Operator's manual

General settings

Setting group 1 must be selected before making any changes to the
parameters in General settings menu.
Parameters under General settings that are changed will cause the IED to restart. This
occurs automatically and requires no manual intervention.
The IED must be in setting group 1 before changing settings in General
settings

Power system

Overview

Under Power system in General settings there are four parameter categories. These are
Identifiers, Primary values, three phase analog group and three phase analog sum group.

Identifiers

Main menu/Settings/General settings/Power system/Identifiers
Displays list with Station Name, Station Number, Object Name, Object Number, Unit
Name and Unit Number.

Primary values

Main menu/Settings/General settings/Power system/Primary values
Displays the system frequency.

Communication

Overview
The parameter settings for communications are found under General Settings
\Communications. Communication settings cover network interfaces, protocol, remote
communication and reception of interlocking information.
Section 9
Read and change settings
41